X

The renavator


GRUNDOBURST 800G

The best thing for pipe renewal

QUICKLOCK BURST RODS

  • Quick locking couplings without thread (QuickLock), no lubrication required, therefore no time consuming screwing together required
  • Quick rod insertion and removal
  • The rods are connected faster than threaded rods
  • Absolutely push and pull resistant
  • Able to negotiate bends
  • Integral production, therefore highly resistant to stress
  • Robust, low-wear as clamping is not required
  • No slipping back of the rods, due to direct force transmission
  • Rod system with convenient rod accessories
  • Longer service life than screwed rods
QuickLock bursting rods are available from 35 mm diameter for pipes from ND 50.
Other rod diameters: 54 mm, 75 mm, 100 mm, 120 mm and 140 mm.
  • Compact dimensions for small pits
  • Can be applied from a pit in both directions
  • Fast operating cycles and high output
  • Rapid rod pushing through old pipe and during new pipe installation
  • Quick to get started
  • All machine models have remote control
  • Low weight for easy transport
  • Accessories specific to the procedure
  • Stable and job-site specific construction to withstand the highest of loads and strain
  • Long service life and low maintenance effort
  • Ergonomic operation and high level of work safety
  • CE-certified

REQUEST FREE CONSULTATION NOW.

TECHNICAL SPECIFICATIONS



  • For pressure and sewer lines ND 3.14 -15.75 inches up to approx. 328 ft (procedural)
  • Compact dimensions for small pits
  • Rapid work cycles and high performance
  • Fast rod pushing into the old pipe and pulling in of the new pipe 
  • Can be applied in both directions - from a single pit
  • Rapid machine start
  • One-man operation with remote control
  • Accessories for specific methods

Renovation by complete renewal with GRUNDOBURST 800G

In the polish capital of Warsaw an extensive investment programme has been carried out for several years now, in order to renew old drinking water pipes in succession, including the relevant house connections. The grey cast iron pipes, which are approximately 120 years old, have done their duty: strong corrosion has significantly reduced the cross-section of the pipes and caused the water quality to seriously deteriorate. Also, in numerous places, leakages were detected, pipe breakages everywhere and therefore causing high water losses. Due to the inner city structure – tight building developments in the business and residential areas, high traffic density, very busy streets – the trenchless method was the only solution for this pipe renewal task. Find out more

TECHNICAL SPECIFICATIONS

PERFORMANCE DATA
GRUNDOBURST 800G
Dimensions of rig LxWxH [mm]:
66.93 x 28.35 x 26.38
Weigh of rig [kg]:
3,196.70
Thrust [kN]:
57,551.10
Pulling force at 250 bar [kN]:
172,878.12
Pit size LxW [mm]:
177.17 x 59.06
Axle height [mm]:
9.84
Recommended hydraulic station:
TT-B110
Drive output [kW]:
73.89 at 2,300 rpm
Hydr. operating pressure [bar]:
3,625.95
Old pipe Ø [mm]:
ND 3.15 - ND 15.75
For pipe materials:
VCP, PVC, PE, grey / ductile cast iron, AC, GFRP, steel
New pipe Ø [mm]:
up to OD 15.75
For pipe materials:
PE, PP, VCP, ductile cast iron, GFRP, steel
Bursting rod Ø [mm]:
2.95 (standard) or 2.13 max. 89,923.60 lbf.
Bursting rod weight [kg]:
28.66
Effective bursting rod length [mm]:
29.53

DO YOU HAVE ANY QUESTIONS?

WE WILL BE GLAD TO HELP YOU!

You can reach us by phone

Call

 

E-Mail
Contact

Do you have any product or
services related questions?

Please contact us:

+61 7 3420 5455

SEND E-MAIL